AIR CONDITIONER FEATURES(CONTINUED)
FOLLOW ME FEATURE:
(only on some models)
Light flashing
Auto
Cool
Dry
Fan
Low
Auto
Med
High
Clean
Air
Fan
Mode
Follow
Me
Energy
Saver
On/Off
NOTE:
To activate the Follow Me feature, point the remote
control towards the unit and press the Follow Me
unit does not receive the Follow Me signal during
any 7 minutes interval, the unit will keep to indicate
the Follow Me mode has ended.
rature at its location. The remote control will send
this signal to the air conditioner every 3 minutes in-
terval until press the Follow Me button again. If the
remote thermostat allowing for the precise
temperature control at its location.
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that
you should become familiar with.
The Cool circuit has an automatic 3 minute time delayed start if the unit is turned off and on too
abruptly. This prevents overheating of the compressor and possible circuit breaker tripping.
The fan will continue to run during this time.
same time, for 3 seconds.
9
This feature can only be activated from the
remote control . The remote control serves as a
button. The remote display shows the actual tempe-
The u nit can show the temperature in Fahrenheit or Celsius.
To convert from one to the other, press and hold the LEFT and RIGHT TEMP/TIMER buttons at the
Summary of Contents for MG-06CR
Page 19: ......