EN
14
5. BEFORE YOU START
5.1. Finding a Viewing Video Source Input on Your TV
After you have completed all of the connections to your TV, review the steps below.
1.
Press
[ (POWER)]
to Turn On the unit.
2.
Turn On your TV.
3.
Please locate the Source / Input / AUX / Video button on TV’s remote control. The button may vary on the TV brand
and model. Once you have located the button, press until you see ˝Please Wait...˝ on the Screen.
Please Wait...
This is the correct viewing of the video Source Input.
•
If the TV is connected by an HDMI cable, it may take a few moments for the opening picture to appear.
5.2. Initial Setup
Please follow the instructions below to complete the initial setup.
1.
Language setup screen will appear. Use
[
]
to select your language, then press
[OK]
.
Please select your language for on-screen
display.
If you want to use the Voice Guide function,
please set to “English” or “Español”
English
Español
Français
Language
2.
Voice Guide Setup screen will appear. Use
[
]
to select “On” or “Off”, then press
[OK]
.
Switch Voice Guide On or Off. Sets On the
Voice Guide, “Audio Output” setting will set to
“LPCM” automatically. If Voice Guide is On, it
will not be able to set the “Audio Output”.
On
Off
Return
Voice Guide
This screen will not appear when “Français” is selected under the “Language” setting.
continued on next page
