Proxy configuration
2
Use
H
I
to Select
Proxy configuration
, then press
OK
.
3
Use
H
I
to Select a setting, then press
OK
.
Do not use
Proxy setting
Proxy configuration
IP configuration
Wireless network setting
Network selection
Use
Proxy port
Proxy address
●
Do not use
is selected for default settings.
●
If you need to change the proxy setting as instructed by your
Internet service provider to set the designated proxy address and
port, select
Use
.
Proxy setting
Do not use
Does Not use the proxy server.
Use
Uses the proxy server.
Proxy address
*
Selects the number or word by
using
H
I
J
K
, then press
OK
.
Proxy port
*
Use
H
I
or
the NUMBER
buttons
to input numbers.
*
Items can be selected only when
Proxy setting
is set to
Use
.
Note(s)
●
The range of input numbers for the port number is between 0 and 65535. (If you enter
a number larger than 65535, it will be regarded as 65535.)
●
For proxy port, the selected ports may be blocked and not be able to use depending on
your network environment.
●
If the proxy address is entered with blank only, proxy server setting will be set to
Do not
use
.
Connection test
Perform the following steps to Test your Internet connection after you
have connected an Ethernet Cable or entered Network Settings such as
IP Address, DNS Settings, etc. manually.
1
Use
H
I
to Select
Connection test
, then press
OK
.
●
Connection Test will start automatically and the Test result for
Home Network and Internet will appear right after the
Connection Test finishes.
●
“
Testing…
” is displayed while the Connection Test is in progress.
Home Network
Internet
Description
Pass
Pass
Connection Test is successfully
completed.
Fail
-
Connection Test for Home
Network failed. Check the
Connection Settings.
Pass
Fail
Connection Test for Internet
failed.
Check the Connection Settings.
●
If the Connection Test for Internet passes, Speed Test will Start
Automatically.
2
Press
OK
to go to the list of Network Status Confirmation screen.
Note(s)
●
If the Connection Test for both Home Network and Internet Pass, you are ready to use
Apps or Network Upgrade Functions using the Internet without making any Additional
Settings.
●
If the Connection Test fails, check if the Ethernet Cable is connected to this TV properly
or if you have entered All the required details for the Wireless LAN Connection properly.
Setting status
You can check the status of network settings.
1
Use
H
I
to Select
Setting status
, then press
OK
.
●
Network setting list will be displayed.
●
MAC address of this unit will be displayed in the list.
41
.
English
Continued on next page.
