Magnasonic PP71, User Manual

Page: 5 / 14

- 5 -
CHARGING THE PROJECTOR
1. The projector is charged using the included USB to micro USB
cable.
2. The LED indicator light will illuminate white and blink to indicate
the projector is currently charging. Each LED light represents
25% power. When all 4 LED lights are on, the projector is fully
charged. IMPORTANT: Fully charge the projector before first use
(approximately 3-5 hours).
3. If only one LED light is on and blinking, it means the projector
has low power. If the battery is too low, the projector will
automatically shut off.
WARNING – PLEASE CHARGE THE PROJECTOR EVERY 3 MONTHS
IF NOT BEING USED FOR LONGER PERIODS OF TIME.
SET UP
1. Connect the HDMI cable (included) to the HDMI port and the
other end to your device. NOTE: You may need an adapter to
connect your device to the HDMI cable. Apple® devices require
an Apple® Digital AV adapter (sold seperately) for HDMI use.
For all other devices, check their manufacturer’s instructions.
Additional adapter specific to your device may be required (e.g.
Micro/Mini HDMI).
2. Connect a speaker to the 3.5mm audio jack, if desired.