Magnasonic PP71, User Manual

Page: 10 / 14

- 10 -
TROUBLESHOOTING
Q: The projector will not show the video on the wall.
A: Recharge your device’s battery. Also, check to see if the HDMI cable
is fully inserted into the projector and your device.
Q: The video showing on my wall is blurry.
A: Adjust the focus wheel on the projector to fine-tune the picture. It
may also depend on the surface on which you are attempting to show
your video. Try moving to a location with a smooth wall surface.
Q: I cannot get my device to work at all with the projector and its
battery is fully charged.
A: Make sure the cables are inserted into the correct ports and test
connections.
Q: No signal – I am getting no input from my device.
A: Make sure your device is on and fully charged. Check the
compatibility chart found on page. 4 to ensure your device is
compatible.
HDMI, and HDMI logo and High-Definition Multimedia Interface , and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.