Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 66 von 82
RCTouch_UserGuide_V3.4.1.doc
7.14 Updating firmware
Find more information on firmware update in the
User manual for the Telemotive System Cli-
ent
.
Note:
Only update the Remote Control Touch / blue PiraT Remote firmware with the vehicle at
standstill.
In the TSL network, the data logger does not record any data during the update.
Launch the Telemotive System Client by double-clicking the sho
rtcut “Telemotive System Cli-
ent” on the desktop or in the start menu.
Select the desired device in the window <Network Logger>.
Selected line is highlighted blue.
Click on the application
[Update firmware]
.
The tab <Firmware- / Licenses update> opens.
Figure 7.11: Tab
“Firmware- / Licenses update”
Note:
If you operate the device in the TSL network, apply the following steps on all TSL mem-
bers.
Under <New firmware> click on
[Open]
.
Dialog opens.
Select the desired firmware, click on
[Open]
.
Note:
For the Remote Control Touch as well as blue PiraT Remote you need the same firmware
as for the blue PiraT Mini.
