Magna Telemotive blue PiraT Remote, User Manual

Page: 49 / 82

Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 49 von 82
RCTouch_UserGuide_V3.4.1.doc
6.3 Display
The display of the Remote Control Touch / blue PiraT Remote is similar to those of the data
loggers. An overview to their meanings is provided in the following table. You can find the view
that contains the dis
play via the cross reference in the column “See”.
Table 6.4: Displays overview
Display Meaning See
Bus load
indicates the degree with which the bus is busy with data transfer 6.2.2.3
6.2.3.2
DHCP mode can be configured under General

Network settings
indicates whether the device functions as a server or a client or
whether DHCP was disabled
6.2.1.2
Error count indicates the number of active errors (can be viewed in the bug re-
porter) when the status is ERROR or WARNING 6.2.1.2
Device name
can be configured under General

Name
provides orientation in the application and is part of the trace file's file
name
6.1.1
6.2.1
6.2.1.2
Device status see Table 6.5: Device status messages 6.2.1
6.2.1.2
Device type
see
Status - Overview
6.2.1.1
Memory percentage
protected can be configured under General

Buffer
indicates the percentage of the memory capacity that is protected
6.2.1.2
IP address indicates the IP address of the device 6.2.1
6.2.1.2
Channel name
can be configured under *Bus*

*Bus #...*

Name
provides orientation in the application and is part of the trace file's file
name
6.2.2.3
Channel number serves as index for sorting the channel lists
is obtained from the configuration in the Telemotive System Client 6.2.2.3
Configuration name can be configured under General

Name
indicates the name of the configuration on the device
6.2.1.2
Logger name
can be configured under General

Name
helps mapping logger-specific tabs
6.2.3.2
Markerlist contains the markers of the set triggers sorted by index
Each marker is specified by the time (date and time) the trigger was
set. The
button is used to play the voice note.
6.2.2.2
Message category see Table 6.2: Message categories 6.2.3.2
Storage capacity depends on the internal memory
Since the Remote Control Touch does not have internal memory, the
tab shows “0 GB”. 6.2.1.2
Subnet mask indicates the subnet mask of the connected device 6.2.1.2
Memory percentage
filled indicates the percentage of the memory capacity that is filled 6.2.1.2