blue PiraT Mini
User Guide
Datum: 21.09.2016
Seite 13 von 56
blue_PiraT_Mini_UserManual_V2.4.1.doc
6.2 Front side
The
blue PiraT Mini
has two 1-Gbit-Ethernet-ports at the front side (
ETH #1 / TSL
und
ETH #2
/ TSL
).
On the front side there are also the
[ON / Trigger]
button as well as LEDs for
ACTIVE
and
STATE
, a
Micro-USB
-connector and the receptacle for
SD cards
.
Figure 6.1: Front panel of the blue PiraT Mini
6.3 Rear side
On the rear side are two more 1-Gbit-Ethernet ports (
ETH #3
and
ETH #4
) and the
44-pol SUB-
D HD
multifunctional main connector for power supply and some of the
[Interfaces]
.
Figure 6.2: Rear side of the blue PiraT Mini CAN / LIN / FlexRay
On the rear side of
blue PiraT Mini MOST
the multifunctional main connector for power supply
and some of the interfaces are realized with a
15-pol SUB-D
connector. Additional you’ll find at
the MOST logger a
MOST150
connector.
Figure 6.3: Rear side of the blue PiraT Mini MOST
