BLUEPIRAT2 | USER MANUAL/
page 25 of 82
For switching off the BLUEPIRAT2 later please press the
[OFF / Esc]
button for a few seconds
until the message <
– – – – – Shutdown – – – – – > is displayed.
Pressing down the
[menu]
knob
will enter the menu mode. Now select the main category “[1]
Info”, then choose the sub category “9/12” with the IP in the display. This IP address is required
for the next step.
Figure 7.4: Info screen IP address
7.1
Default network settings
Important:
The loggers default setting is *Automatic
DHCP-configuration for TSL
with IP
192.168.0.233*)
and has to be connected by an Ethernet cable from „ETH #1 / TSL“ or
„ETH #2 / TSL” to your computer system.
