BLUEPIRAT2 | USER MANUAL/
page 21 of 82
6.7.3 Error Memory
This main category lists all active errors. The message <No errors> appears, if no error is ac-
tive. By rotating the
[menu]
knob you can navigate through the error massages.
6.7.4 Memory Device
This main category has currently eight sub categories. But these functions can only be exe-
cuted, if an external memory device is installed. Otherwise the message <Error: No memory de-
vice attached > will be displayed.
Currently there is no difference made between memory card (CF) and USB stick.
Note: Never remove the external memory before pressing „Safely remove ext. Mem.“.
6.7.4.1 Copy to memory device
In order to copy the recorded data to an external memory you have to perform the following
steps:
1. In the System Client under General / External Storage set [Logging on External Storage]
to [Off]
2. Click on the button [Write to logger]
3. Restart the logger.
There are five options available in this sub category:
18. Copy all data
19. Copy data of last 60min
20. Copy data of last 12 hours
21. Copy data of last 24 hours
22. Copy data of last 48 hours
By selecting one of the options and pressing the
[menu]
knob the copy function will be exe-
cuted. The progress of the save operation will be displayed on the display. After the copy pro-
cess is finished the message < Memory Device success: Data copied > will be displayed for a
short time.
The folder name of the offline data has the format “Offline_bp2_ext_FW-*current firmware of the
logger*_*serial number of the logger*_*start time of data*_*end time of dat
a*”. The times are
recorded in the time standard UTC like this: yyyymmdd_hhmmss.
6.7.4.2 Erase memory device
After pressing the
[menu]
knob a verification message will be displayed. With the
[OFF / Esc]
button the process can be aborted, with the
[menu]
knob the BLUEPIRAT2 begins to erase the
memory of the memory device. After completion the message <Memory card successfully
erased> will be displayed.
6.7.4.3 Format memory device
After pressing the
[menu]
knob a verification message will be displayed. With the
[OFF / Esc]
button the process can be aborted, with the
[menu]
knob the BLUEPIRAT2 begins to format the
