BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 48 of 93
8.3
Manual configuration
22. Reset camera to the factory default settings.
23. Connect camera with the PC / laptop via an Ethernet cable.
24. Open browser.
25. Type in the preset IP address of the network camera:
192.168.0.90
.
26. Press
[Enter]
.
27. Click
[Setup]
.
28. Add administrator.
If you don't know the cameras IP address, use the program
“IP-Utility” on the AXIS CD-ROM for
detection.
If it is still not possible to connect to the camera setup, please reset the camera via hardware
reset. This is described in the camera manual. In this case you have to use the fix IP address
192.168.0.10 for your PC. The camera is reachable by the IP address 192.168.0.90.
A step by step configuration of the camera is described in the section below.
The following instructions are illustrated by screenshots of the camera setup of the AXIS 210.
The layout of the other supported cameras 207, 207W and 211 can differ.
Note:
All modifications of one setup screen must be applied by the [Save] button. Otherwise
the changes will be discarded.
8.3.1 Resetting configuration
The camera AXIS 207/210/211 can be set to default settings at
[System Options]
[Mainte-
nance]
with the
[Default]
button under <Maintain Server>.
Figure 8.6: Reset configuration
