BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 34 of 93
6.6
IP configuration
Change to the entry
[Basic Setup]
[2 TCP/IP]
. Choose the <IPv4 Address Configuration>
(o) Use the following IP address
. Type in these data:
IP address:
192.168.1.90
Subnet mask:
255.255.255.0
Figure 6.19: Setting an IP address
Confirm the settings with
[Save]
.
Note:
By changing the IP address you lose the connection to the network camera.
This also will be told to you in an information window:
Figure 6.20: Hint 1
Figure 6.21: Hint 2
For reconnecting you have to change your computers IP address to
192.168.1.80
. Then type in
your browser the new IP address of the network camera, to access the configuration again.
Note:
Finally, change your PCs or laptops IP configuration back to dynamic configuration.
