BLUEPIRAT RAPID | USER MANUAL/
page 19 of 67
7.2
SUB-D 15 und SUB-D 78 Pin
The SUB-D 15 pin connector is for connecting a cable for the Analog Inputs #2 - #7.
The SUB-D 78 pin connector is for the I/O cable set, which contains the CAN / LIN / FlexRay /
Serial / UART connections as well as the connectors for Kl15, WakeUpLine and Digital Inputs
#1 - #4.
Figure 7.3: BLUEPIRAT Rapid - SUB-D 15 und SUB-D 78 Pin
7.3
Power Primary & Power Secondary
BLUEPIRAT Rapid offers two interfaces for connecting power sources, which allows to have a
redundant and save power supply.
Figure 7.4: BLUEPIRAT Rapid - Power Primary & Power Secondary