Magna-Matic Corporation - W4599 County Road IW - Waldo WI 53093 USA - Phone: (920) 564-2366 - FAX: (920) 564-2368 - Toll Free USA & Canada
1-800-328-1110
http://
www.magna-matic.com
- email: [email protected] © Copyright 2023 All rights reserved
Quick Setup Guide
WARNING
WHEN USING ELECTRIC TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, AND PERSONAL INJURY.
CAUTION
TURN OFF AND UNPLUG
BEFORE SERVICING
Page 1
For all MAG-8200 Series Lawn Mower Blade Sharpeners
Unpack the machine and check components:
Box Contents: Sharpener, Grit Guard, Spanner Wrench, and Arbor Wrench
The MAG-8200M models additionally has a 3/16” hex wrench, 1/2” wheel, 1/2” spacer,
rounded worktable insert and flat table insert.
Assemble the grit guard.
1. Use ten self-tapping screws.
2. Assemble the grit guard sides to the top of the grit guard.
3. The grit guard sides are identical and the holes will only line up in one orientation. (top
vs bottom)
4. Then attach the bottom of the grit guard.
Assemble the grit guard to the MAG-8200
5. Remove the front cover (black cover with model decal on it) to expose the grinding
wheel as shown in images, see page 2 how to remove grinding wheel.
6. Use two self tapping screws to connect the bottom of the grit guard to the black base of
the sharpener. The bottom of the grit guard is under the base of the sharpener, the put
the screws in from under the machine, see image to right.
7. Use two button head screws with nylon nuts to connect the top of the grit guard to the
red body.
8. Connect the crank handle to the end of the threaded adjustment rod with the set screw
in the crank handle base.
Purchase grinding wheels and other parts
and accessories at:
www.magna-matic.com
If you have any problems or
questions please call:
800-328-1110
For full instruction manual:
www.magna-matic-direct.com/instruction-manuals/