1
■
Outrigger to be suspended from two cleats
“a
&
b”
(Minimum 3’ (1M) apart / maximum 16’ (5M) apart
and a third cleat
“c”
centered between
“a
&
b”.
Contents of R10-707
Contents of R10-702
Materials required
Fasteners (4)
Depth Control
Line
Retrievel
Line
3'–16'
(1M – 5M)
b
a
c
Rock ‘n Roll
™
•Stabilizer System (R10-702) and
•Outrigger (R10-707)
TM
ASSEMBLY INSTRUCTIONS
2
BULKHEAD
■
Mount
boot
using appropriate fasteners
near bulkhead. Consult your boat
manufacturer or local shipyard repair
facility for mounting advise on
permanent hull attachments.
Position boot by
referring to
fig. 2, 3, & 4.
■
Apply marine bedding
compound between
boot
and
hull
(Sikaflex
231 or equivalent).
3
BOOT
MARINE
BEDDING
HULL
■
Position
boot
as shown for optimal operation
of Stabilizer/Outrigger system.
4
2' to 3'
35º - 45º
6" to 12"
®
For boats up to 40,000 lbs. one Rock 'n Roll Boat
Stabilizer is recommended. For boats over 40,000 lbs.
or in situations where more stabilization is required
we recommend two stabilizers.
United States Patent No. 5,263,434
United States Patent No. 5,095,839
