Magma EB3600-AB, User Manual

Page: 118 / 143

Magma
EB3600-AB | Chapter 7 Rack Slide Installation 118
CAUTION
Elevated Operating Ambient Temperature
:
If the expansion is installed in a closed or multi-
unit rack assembly, the operating ambient temperature of the rack environment might be
greater than room ambient temperature. Therefore, consideration should be given to installing
the equipment in an environment compatible with the maximum ambient temperature (Tma)
specified for the expansion.
CAUTION
Reduced Air Flow : Installation of the equipment in a rack should be such that the amount of air
flow required for safe operation of the equipment is not compromised
CAUTION
Circuit Overloading: Consideration should be given to the connection of the equipment to the
supply circuit so that overloading of the circuits does not compromise the supply wiring or over
current protection. To provide the correct power connection to a rack, refer to the rating labels
located on the equipment in the rack to determine the total power requirement of the supply
circuit.
CAUTION
Reliable Earthing: Reliable earthing of rackmounted equipment should be maintained.
Particular attention should be given to supply connections other than direct connections to the
branch circuit (for example, use of power strips).
Tools and Supplies Needed
1. Phillips* (cross head) screwdriver (#1 bit and #2 bit)
2. Measuring Tape
Parts List
Item#
QTY
Description
1
2
Slide Rails
2
2
Bags of Assorted Nuts & Bolts, Bar Shim and 2 Short End Brackets
3
1
End Brackets (2-long)