Magma EB3600-AB, User Manual

Page: 113 / 143

Magma
EB3600-AB | Chapter 6 Functional / Benchmark Tests 113
Replaceable Fan Test
A. Pull all the fans out, do it one at a time. Start with Fan#1 first.
a. Audible Alarm sound off
b. Check FAN Details. It should show “FAN 1- 0 RPM’ in red font
c. Check Front Panel Status LED: FAN 1 LED is lit as solid ORANGE
B. Put the FAN 1 back into the fan slot holder.
d. Check Front Panel Status LED: FAN 1 LED turns to solid Green
e. Check Fan Details (via Express IO Manager). FAN 1 should show RPM value (i.e. FAN 1: 8057 RPM)
f. Press the “Alarm Reset Button” to turn on Audible Alarm
Perform the same methods with the three remaining FANs. All Four Fans should be tested.
Replaceable Power Supply Test
A. Disconnect power cord or pull out the power supply from housing, do this one at a time. Start with
power cord#1 or power supply #1
a. Power Supply audible alarm reverberates.
b. Power Supply LED turns to Orange.
c. PSU Details (via Express IO Manager) should show “Failure”.
d. Front Panel Status LED for PSU turns to Orange.
B. Put the power cord or power supply module.
a. Press the Alarm Reset Button, this should silence the alarm.
b. Power Supply LED turns to solid Green.
c. PSU Details (via Express Io Manager) should show “Power Supply is Good”
d. Front Panel Status LED turn to solid Green.