Magma EB3600-10, User Manual

Page: 136 / 143

Magma
EB3600-AB | Chapter 10 Chassis Maintenance 136
Cleaning the Air Filter
The chassis is equipped with an air filter that is easy to remove and clean. To keep your chassis running at its
coolest, you should clean this filter regularly. How often the filter requires cleaning depends on
environmental conditions where your Magma Expansion chassis is located. To clean this filter, follow these
simple steps
.
First, power down the chassis and then remove the screws on the front panel with a Phillips screwdriver.
Next, open the faceplate slowly
Then remove the foam filter, located behind the faceplate, and clean it with a solution of warm water and
mild dish soap. Finally, replace the filter, reconnect the LED panel. Secure faceplate with Phillips screws.
Tighten screws until snug and turn on power to the chassis (see above picture).