Magma EB3600-10, User Manual

Page: 120 / 143

Magma
EB3600-AB | Chapter 7 Rack Slide Installation 120
Slide Rail Installation Instructions
Prepare Slide Rails for Assembly (STEP 1)
Remove slide rails and end bracket from the box.
Remove slide piece
A from the assembly. Slide the inside portion of the rail completely out until you hear
an audible click. On the inside of the rail, you will see a rail stop hook, push the hook up to release and
detach the inside portion of the slide completely from the outside portion of the rack slide. Set aside slide A.
You will be mounting this part of the expansion chassis.
The remaining assembly includes slide piece
C inside slide piece B .
Prepare the end bracket extension. The end bracket
D will be added to slide piece B in Step 3 .