1-800-MAGLINE (624-5463)
Page 19 www.magliner.com
CooLift
®
Area
Description
Method of Inspection
Normal Condition
Findings Pass or
Fail
Timing
Notes
Suspension
Mounting hardware is tight • Front wheel yoke • Rear caster frame • Main axle mounts to frame and axle clamp • Cotter pins for main wheels
Manual inspection
All hardware is tight
Monthly
Linkage System
Hardware is properly installed and undamaged • Spring pins • W
ashers
•
Springs
Visual inspection
All hardware is in place and in good condition
Monthly
Linkage System
Link pins
Visual inspection
•
Pins are straight with no signs of wear
•
Pin plating is not cracked or damaged
Monthly
Linkage System
Links • Minimal play between pins and bushings • Bushings are not working out of links
Manual / V
isual
inspection
•
Links are straight with no signs of damage or wear
•
Minimal play between pins and links
•
Bushings are flush with side of the
links
Monthly
Linkage System
Link pins are not loose in deck, frame or sync links
Manual inspection
Minimal play between pins and deck, frame and synch links
Monthly
Operator Interface
Internal mounting hardware is tight • V
ertical slide cover screws
•
Vertical slide mounting screws
•
Guide block cotter pins in rod
•
Pump mounting plate
•
Pump mounting screws
•
Pump band clamp
Manual inspection
Components are tight to mounting surfaces
Monthly
Operator Interface
Brushes •
In front of enclosure
•
In door
Visual inspection
•
Brushes are not worn or damaged
•
Brushes are properly positioned in holders
Monthly
W
elds
Frame - general
Visual inspection
No cracks or damage
Monthly
W
elds
No cracked welds
Visual inspection
No cracks or damage
Monthly
