1-800-MAGLINE (624-5463)
Page 17
www.magliner.com
CooLift
®
Area
Description
Method of Inspection
Normal Condition
Findings
Pass or Fail
Timing
Notes
Hydraulics
Cylinder is not leaking
Visual inspection
Thin film of oil on piston rod
W
eekly
Hydraulics
Cylinder condition •No rod scoring •Return springs fully functional
Visual inspection
Cylinder rod is smooth and retracts fully into cylinder body
W
eekly
Suspension
Wheels and tires are in good condition
Visual inspection
Wheels and tires are free of damage
W
eekly
Suspension
Components are straight and undamaged •Front wheel mounting yoke •Main axle •Rear swivel caster frames
Manual inspection
•
Components are not damaged and operate freely
•
Main axle plating is not cracked or damaged
W
eekly
Operator Interface
External mounting screws are tight •Base plate mounting to frame •Enclosure mounting or base plate •Handle mounting screws •Switch plate mounting screws
Manual inspection
Components are tight to mounting surfaces
W
eekly
Operator Interface
Handle, enclosure and door are free of damage and in good condition
Visual inspection
•
Straight sections
•
Smooth curves
•
Flat surfaces
•
Minor scratches and dings are expected
W
eekly
Operator Interface
Handle grips
Visual inspection
Grips are not worn or damaged
W
eekly
Operator Interface
Containment strap
•
Belt should be free of tears and abra
sions
•
Plating on buckle should not be cracked or damaged
•
Mounting screws should be tight
•
Mounting tab should not be bent or dam
-
aged
•
Belt should retract into housing such that only the buckle protrudes
•
Housing should not be cracked or damaged
•
Strap tongue should rotate freely
W
eekly
