background image

       1-800-MAGLINE (624-5463) 

 

 

 Page 13                                               www.magliner.com

CooLift

®

Replacement Part Description

Part Number

Axle - 14.3” long for center CooLift wheels

309020

Axle - 12.9” long for front wheels

309844

Axle mount bracket for center wheels

315009

Back access panel

315081

Brake disc

309050

Brake handle clamp

81207

Brake line assembly (includes brake lever, master cylinder, split brake line, junction box, calipers 

and brake pads) PLEASE NOTE: items within assembly not sold separately.

315090

Brake line insert bushing

315098

Brake line nut

315097

Brake pedal kit (includes brake pedal, two 80302 screws and two 80675 lock nuts)

86433

Bulk head for CMH43 and CMH48 models

309790

Bulk head mount

315087

Cable tie

61052

Caster - 6” x 2” swivel, gray TPR with top brake (rear caster)

13085

Caster brake weldment

315117

Caster brake pedal

315107

Caster wheel - 6” x 2” gray flat tread (front caster)

130014

Center wheel - 10” x 2” with deep groove ball bearings

309059

Clamp block for axle/brake caliper mount

309022

Containment strap

309152

Containment strap mounting spacer - all models

309150

Containment strap tongue

309133

Cotter pin - 1/8” x 1-1/2” long

81078

Cross brace assembly

315048

Cross brace warning label

98360

Deck weldment

315030

Deep groove ball bearing for center CooLift wheels

309060

Handle assembly with foam handle sleeve

315042

Handle cross brace with rivnuts

315047

Hex head cap screw - 5/16”-18 x 1” long

80011

Hex head cap screw - 5/16”-18 x 1-1/4” long

80012

Hex head cap screw - 5/16”-18 x 2” long

80018

Hex head cap screw - 3/8”-16 x 1” long

80025

Hex head cap screw - 3/8”-16 x 1-1/4” long

80132

Hex head cap screw - 3/8”-16 x 1-1/4” long

80026

Hex head cap screw - 3/8”-16 x 1-1/2” long

79988

Hex lock nut - 1/4”-20

80675

Hex lock nut - 5/16”-18

80676

Hex lock nut - 3/8”-16

80603

Hex lock nut flange - 3/8”-16

80624

Hex socket head cap screw - 5/16”-18 x 1” long

80038

Hydraulic cylinder assembly (includes items below with *)

315094

Summary of Contents for CooLift CMH Series























Reviews: