MAGIDO GROUP X51 Series, Operation And Maintenance Manual, Page: 56 / 96

GENERAL INFORMATION REGARDING THE INSTRUCTION MANUAL
REVISIONE: X51-1213 EN 1 MAGIDO GROUP S.r.l.
GENERAL INFORMATION REGARDING THE INSTRUCTION MANUAL
Introduction
This manual is a valid help in knowing and using correctly your machine, it is therefore necessary that you Read
it carefully before use.
This instruction manual has been produced by MAGIDO GROUP S.r.l. and is in integral part of your parts
washing machine .
Every machine contains its own instruction manual. The user is responsible for the management of this manual
for the full working life of the machine, and must provide for it’s destruction with the dismantling of the
machine.
The company MAGIDO GROUP S.r.l. does not respond to eventual “tampering with” of this manual or for
changes made to the machine by the user, after delivery of the same, and not foreseen in the present
document.
The company reserves the right of the intellectual ownership of the manual and prohibits the disclosure in
whole or in part, in any format (printed, photocopies, microfilm, o other) as well as the elaboration,
reproduction, or the distribution by electronic means, to persons, juridical or fiscal without its approval and
registration.
Reference to the directives CEE and terminology used
Indications contained in the following documents have been used in the realisation of this manual:

Directive 2006/42/CE machinery directive;

Directive 2004/108/CE EMC Directive;

Directive 2006/95 CE Low Voltage Directive;
The machine has been built according to the following rules:

EN ISO 12100-1 Machine safety standards;

EN ISO 13857:2008 Safety of machinery. Safety distances to prevent hazard zones being
reached by upper and lower limbs;

EN ISO 14121:2007 Safety of machinery -- Risk assessment -- Part 1: Principles;

EN 1037:1996+A1:2008 Prevention of unexpected start-up;

EN ISO 14159:2008 Safety of machinery. Hygiene requirements for the design of
machinery.
Purpose of the document
The purpose of the manual is to provide the user with indications and the information that must be followed
scrupulously for the correct operation of the machine and for the safety of the operator who must interact
with it. For this reason we ask the user:

to make this document available in all work areas, make it’s presence known and illustrate it to all
the operators;

to pass this manual onto successive owners of the machine.