magicpak All-In-One MHP4 Series Installation And Maintenance Instructions Manual Download Page 1

Page: 1 / 15

Check that equipment complies with all applicable building codes, laws, and regulations for its intended use prior to installation.

507861-01

Issue 2110

Page 1 of 15

Manufactured By

Allied Air Enterprises LLC

A Lennox International Inc. Company

215 Metropolitan Drive

West Columbia, SC 29170

Improper installation, adjustment, alteration, service, or

maintenance can cause injury or property damage. Refer

to this manual. For assistance or additional information,

consult a qualified installer or service agency.

WARNING

Table of Contents

Installation ...................................................................1

Operation .....................................................................9

Maintenance ..............................................................11

Accessories ...............................................................12

Wiring Diagrams ........................................................14

The installation of this appliance must conform to the requirements of the National Fire Protection Association; the National

Electrical Code, ANSI/NFPA No. 70 (latest edition) in the United States; the Canadian Electrical Code Part 1, CSA 22.1

(latest edition) in Canada; and any state or provincial laws or local ordinances. Local authorities having jurisdiction should

be consulted before installation is made. Such applicable regulations or requirements take precedence over the general

instructions in this manual.

CAUTION

(P) 507861-01

*P507861-01*

Installation

These units are not approved for mobile home

applications. Such use could result in property damage,

personal injury, or death.

WARNING

General

These instructions explain the recommended method of

installation of the MagicPak All-In-One™ HVAC system

model MHP4 electric cooling unit and associated electrical

wiring.

This unit is designed and approved for use as a self-

contained air-to-air air conditioning system with optional

CLIMATE GUARD™ coated coils.

These instructions, and any instructions packaged with

mating components and/or accessories, should be carefully

read prior to beginning installation. Note particularly any

CAUTIONS

WARNINGS

in these instructions and all

labels on the units.

Save these instructions for future reference

INSTALLATION AND MAINTENANCE INSTRUCTIONS

MHP4 Series

Self-Contained Heat Pump

This is a safety alert symbol and should never be ignored. When you see this symbol on labels or in manuals, be alert to

the potential for personal injury or death.

Summary of Contents for All-In-One MHP4 Series
















Search results

Summary of Contents for All-In-One MHP4 Series

Reviews:

Related manuals for All-In-One MHP4 Series

Brands by name

Popular brands

magicpak All-In-One MHP4 Series, Installation And Maintenance Instructions Manual

Search results

Summary of Contents for All-In-One MHP4 Series

Reviews:

Related manuals for All-In-One MHP4 Series

Brands by name

Popular brands