8 MAGICFX
®
SMOKEBUBBLE BLASTER
—
User and Installation Manual
1.4
FX FLUIDS
The MAGICFX
®
SMOKEBUBBLE BLASTER uses bubble fluid and smoke fluid from MAGIC
FX to create smoke bubbles. The fluids are delivered in jerrycans. The 20 litre jerrycan
with bubble fluid is placed and connected in the bubble cabinet, see Section 3.2. The
5 litre jerrycan with smoke fluid is placed and connected in the smoke cabinet, see
Section 3.3. The sheet metal interiors of the cabinets hold the jerrycans in place.
Do not use other fluids than those that are approved and supplied by MAGIC FX, see
following table.
Code
Type of fluid
Volume
MFX3027
MAGICFX SMOKEBUBBLE BLASTER
®
- SMOKE FLUID
5 litre
MFX3003
MAGICFX
®
PRO BUBBLE FLUID - READY TO USE
20 litre
Approved FX Fluids
1.5
MANUAL MODE
In Manual mode the machine starts bubbling instantly when switched on. In the
menu on the display you can set the following values for Manual mode:
Manual operation menu items
Values
Manual mode
ON / OFF
Run timer
0 – 600 (s)
Pause timer
0 – 600 (s)
Reduced output
ON / OFF
Smoke
0 % / 50 % / 100 %
Output distance
0 – 255
Manual mode
1.6
DMX CONTROL
When connected to DMX and with Manual mode OFF the MAGICFX
®
SMOKEBUBBLE
BLASTER is controlled with 1 safety address and 4 operational addresses:
DMX Address
Address range
Safety address
1 – 512
Start address (Bubble setting)
1 – 509
Start a 1 (Smoke setting)
2 – 510
Start a 2 (Fan speed)
3 – 511
Start a 3 (Go trigger)
4 – 512
DMX addresses
