P160 User Manual
11
Enrolling a fingerprint
There are several optional modes to set the
verification way.
Press
▼
/
▲
to select “Fingerprint” on the New User interface, press [M/OK]:
1.
Press numeric key corresponding to the
fingerprint as you want, then press [M/OK].
2.
Press your fingerprint on the sensor three
times upon prompting by the device.
Note: You need to re-enroll if the device says
“Please try again”.
Enrolling a palm
Press
▼
/
▲
to select “Palm” on the New User interface, press [M/OK]:
Note: Place your palm vein inside the green
box, as the device says.
Enrolling a Badge
Press
▼
/
▲
to select “Badge Number” on the New User interface, press [M/OK]:
