© 2014 Karaoke Home Entertainment All Rights Reserved
– Document Revision 1.0
www.khe.com.au
/
www.khe.co.nz
/
www.picknmix.com.au
/
www.mp3g.com.au
www.how-to-convert-cdg.com
/
www.magicsingdownloads.com
/
www.magicsing.com.au
How to connect and user guide for Magic Sing ET-23KH model.
Please follow all steps before calling for addition help.
CONNECTION STEPS
1.
Plug the power adaptor into the wall socket and the connection on the other end plugs into
the base unit at the back.
2.
This unit allows you to use HDMI (HD-TV) or standard RCA (RED, WHITE and YELLOW)
connections depending on the television which you are using.
3.
Decide which connection you need to use and before doing anything, make sure the unit is
SWITCHED OFF. Carefully take off the top piece of plastic on the base unit revealing chip
slots and a small switch. If you are using RCA, make sure the little black switch is toward “
TV
”
and if you are using HDMI connections, flick it over to “
HD-TV
”.
4.
If you are using standard RCA connections to your television, move onto
step 5
.
If you wish to connect your unit to your amplifier or home theatre system, skip
to
step 6
.
If you are going to use your HD connection to your
television, skip to
step 7
.
Power cable
→ Base Unit
(rear)
Gently Slide
Back the Cover
