36
MAGIC-PRO MP-6VIP-D
SUPERVISOR/USER PASSWORD
These two options allow you to set your system passwords. Normally, the
supervisor has a higher ability to change the CMOS setup option than the user.
The way to set up the passwords for both supervisor and user are as follows:
1. Choose CHANGE PASSWORD from the Main Menu and press
<Enter>. The following message appears:
“Enter Password:”
2. The first time you run this option, enter your own password up to 8
characters and press <Enter>. The screen doesnt display the
entered characters.
3. After you entered the password, the following message appears
prompting you to confirm the password:
“Confirm Password:”
4. Enter the same password exactly as you just typed again to
confirm the password and press <Enter>.
5. Move the cursor to Save & Exit Setup to save the password.
6. If you need to delete the password you entered before, choose the
Supervisor Password and press <Enter>. It will delete the password
that you had before.
7. Move the cursor to Save & Exit Setup to save the option you did,
otherwise the old password will still be there the next time you turn
your machine on.
8. Press <ESC> to exit to the Main Menu.
Note: If you forget or lose the password, the only way to
access the system is to clear the CMOS RAM by
setting JBAT1. All setup information will be lost and
back to default seting. You need to run the BIOS
setup program and re-define all settings again.
