1
Installation
Hardware List
Hardware List
Seat
1
Backrest
1
Right armrest
1
8x25mm screws
16
Nuts
、
Washers
、
long screws
4
Legs
5
Support rods
2
Iron sheets
2
1
2
Install the support rods as shown in picture 1
Backrest
8x25mm screw
Insert the backrest into the seat
cushion, notice the short lock
buckles facing forward, and then
fasten the lock buckles to the ring of
the seat cushion according to the
diagram. (If the rope is not long
enough, don’t worry, this is not a
quality problem, it’s for the solidness
after the installation of the lock
buckles. When this happens you
need to press the backrest and the
seat cushion down, the lock can be
easily buckled)
