User documentation MAGICFX® Confetti Gun
Page 11
8. USAGE
TIP:
Gives you suggestions and advice regarding easier or more
convenient ways to carry out certain tasks.
CAUTION:
The machine can be damaged, if you do not follow these procedures
carefully.
DANGER WARNING:
The MAGICFX® Confetti Gun may only be installed by adults and
authorised persons.
The Confetti Gun may only be operated if all parts are completely and
correctly installed/connected.
For using the Confetti Gun
take the following steps:
3.
Pull the trigger to shoot the first or all the
cannon’s depending on which mode the
Confetti Gun is. Repeat to shoot all the
cannon’s.
Make sure that you only shoot when there
are no people, animals or objects in the
shooting range of the cannons.
2.
If the safety pin is enabled you can
remove it by pushing the pin to the left.
To restore the safety, push the pin back
to the right side.
1.
Turn on the Confetti Gun, the indicator
LED’s will all blink twice to test if the
LED’s are working. If there are any
cannons plugged in and the gun is in
single shot mode the left most LED starts
blinking indicating the cannon is ready to
be shot. In full shot mode all LED’s
where a cannon is connected start to
blink.
