Setting Date & Time
1.
Time zone:
specify a time zone for your device and click
Apply
after
configuraion.
2.
Set time automatically:
turn on
Set Time Automatically
. Then the
device's time will synchronized to the world-time servers depending on
the timezone you set. Otherwise, you can set time manually. Click
Apply
after configuraion.
Network Settings
Changing network connections in the
System
tab requires administrative rights.
By default, the Pro Convert unit automatically detects any connected network.
You can set a static IP Address if the device failed to auto-configure using
DHCP. If multiple devices are connected using USB NET, change the IP address
according to your own arrangement.
Setting Ethernet IP Address
1. Click and enter the
System > Network > ETHERNET
section.
2. Click
Edit
.
Cloud address:
shows the IP address of Cloud.
■
HTTP port:
shows the HTTP port of device used to communicate with
Cloud.
■
NTP server 1:
the default server is 0.pool.ntp.org.
■
NTP server 2:
the default server is 1.pool.ntp.org.
■
43
Summary of Contents for Pro Convert AES67
Page 1: ......
Page 61: ...Figure3 Linux Terminal Figure4 Mac Network 61 ...
