manualshive.com logo in svg

Magellan RoadMate N477, User Manual, Page: 38 / 38

Share
Download
Magellan RoadMate N477 User Manual Download Page 38

N477 User Manual 

Page 29

Setting the Time Format

1.  Access the System Settings menu (above).
2.  Tap Time Format.
3.  Tap on 24 Hours or 12 hours with am/

pm.

4.  Tap the back arrow.

Keyboard

Setting the Keyboard Layout.

1.  From the Main Menu screen, tap the 

Settings icon. 

2.  Tap Keyboard.
3.  Select QWERTY (default) or ABC keyboard 

layouts.

Units of Measure

Selecting Units of Measure

1.  Access the System Settings menu (above).
2.  Tap Units.
3.  Tap on the desired unit of measure.
4.  Tap the back arrow.

Regions

1.  From the Main Menu screen, tap the 

Settings icon.   

2.  Tap Region.
3.  Select an available map that is installed in 

your receiver.

GPS

Setting the GPS Position

If the  N477 receiver is transported over 800 
km/500 mi while turned off, it may take a 
long time to find satellites and establish its 
location. Setting the GPS position will allow 
the  N477 receiver to compute which satellites 
are available and calculate the position more 
quickly.

1.  From the Main Menu screen, tap the 

Settings icon.   

2.  Tap GPS.
3.  Tap Set GPS Position.
4.  Enter an address as you would select a 

destination.

Viewing the GPS Status

1.  Tap the satellite signal indicator in the 

upper right corner of the Main Menu 
screen to access the GPS Status screen 

2.  You can also access the GPS Status screen  

from Settings > GPS > Status.

Default System Settings

Restoring All Default System Settings

1.  Access the System Settings menu (above).
2.  Tap Restore Default.
3.  Confirm that you want to proceed in 

restoring all the system defaults.

Product Information

Viewing Product Information

1.  From the Main Menu screen, tap the 

Settings icon.   

2.  Tap Product Information.
3.  (Note: Scroll down the page to view the 

Serial Number and Software Version.)

In Case of Trouble

The receiver does not have a reset button.
If  your receiver doesn’t seem to respond 
properly, do the following:

1.  Connect the receiver to a Magellan 

power supply and see that the indicator 
light on the power button is ‘on’.

2.  Press and hold the power button for 

several seconds until it turns off. 

3.  Press and hold the power button until 

you see the Magellan logo appear on the 
screen.

4.  This cleas any user inputs, but does not 

clear an active route.

To completely clear the receiver:

1.  Map page > Menu > Settings icon
2.  Tap “Restore Default Settings”
3.  To “Restore All Defaults”, tap Yes.
4.  The receiver should restart with the 

factory defaults loaded.   

Summary of Contents for RoadMate N477







































Reviews:

No comments