17
English
Setting Up the Rover
Install the unit on its range pole:
1. Mount the GNSS antenna on top of
the pole using a quick release exten-
sion.
2. Mount the radio modem onto its
bracket using the screws, nuts and
washers provided.
3. Secure the radio bracket onto the
pole.
4. Connect the GNSS antenna to the
ProMark3 RTK using the cable pro-
vided.
5. Connect the radio cable to the back
of the ProMark3 RTK.
6. Attach the field bracket onto the pole
7. Place the ProMark3 RTK into the
field bracket
8. Measure the antenna height.
Configuring the Rover
1. Turn on the ProMark3 RTK.
2. Double-tap the
DGPS Configuration
icon. This opens the
DGPS Configuration window.
3. Tap
Select Mode
, select
UHF
and tap
OK
. Tap
OK
again to
close the DGPS Configuration window.
Initializing the Rover
1. Move the rover antenna from the range pole to the kine-
matic bar (see picture below left), then:
2. On rover side, double-tap the
Surveying
icon.
3. Press MENU, tap
Receiver Mode
, then
Real-Time
.
4. Press MENU and tap
Initialize RTK
.
5. Select
Bar
. This opens the Initialization window.
1
2-3
6-7
4
7
6
5
