English
12
What if there is no USB mass storage device connected to
ProMark 500?
• Parameters relevant to the USB key size and space used
and available are void (three dots displayed instead).
• Number of files is forced to “0”.
Receiver
Identification
Screen
From any of the two Memory screens, press the Scroll button
to access the Receiver Identification screen. See example
below.
• Receiver Serial Number
• Firmware Version
• Receiver Bluetooth Identifier
A new press on the Scroll button will take you back to the
General Status screen. From any screen, a long press on the
Scroll button will also take you back to the General Status
screen.
Screen Backlight
The screen backlight is automatically turned off if no key is
pressed for 1 minute. When the backlight is off, a short press
on the Scroll button will turn it back on. The Scroll button will
then recover its usual functions.
Data Transfer
Screen
For more information on the screen displayed when
downloading files, refer to
