manualshive.com logo in svg

Magellan MobileMapper - GPS Software, User Manual

Share
Download
Magellan MobileMapper - GPS Software User Manual Download Page 78

70

19.Baud Rate

This option enables you to check or set the baud rate of 
the data being sent out from the MobileMapper Pro’s out-
put port. The possible choices are: 1200, 4800, 9600, 
19200, 57600 or 115200 baud. The default baud rate is 
4800.

If you wish to manually set the Baud rate, select the 

Baud 

Rate

 option from the Setup menu, use the up/down arrow 

to highlight the desired choice and then press ENTER.

The MobileMapper Transfer utility automatically sets the 
Baud rate to 115200 - the maximum speed of data trans-
fer. However, the maximum Baud rate allowable for updat-
ing receiver software is 19200. You must select this rate, 
or lower, prior to updating.
Whenever you attach a MobileMapper Pro to an external 
source of real-time differential corrections, you should 
check that both the GPS and the beacon receivers are set 
to the same Baud rate.

20.Power Key

This option allows you to change how the PWR button 
operates in turning MobileMapper Pro on or off. Two 
choices are possible:

-

No protection

: this is the normal case of use. With this 

option enabled, you will have to press the PWR button 
to turn MobileMapper Pro on. You will press the PWR 
button again to turn MobileMapper Pro off.

-

On/Off protected

: To turn MobileMapper Pro on with this 

option enabled, you will have to press and hold the 
PWR button until the first screen is displayed. To turn 
it off, you will have to press the PWR button, and then 
press the ENTER button before the power off timer is 
done.

After selecting the 

Power Key

 option from the Setup menu, 

use the up/down arrow to highlight the desired choice and 
then press ENTER.

Default: No protection

Summary of Contents for MobileMapper - GPS Software































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands