manualshive.com logo in svg

Magellan MobileMapper - GPS Software, User Manual

Share
Download
Magellan MobileMapper - GPS Software User Manual Download Page 76

68

14.Contrast

This option allows you to set the screen contrast. After 
selecting this option, a new screen appears on which you 
can set the percentage of contrast using the left/right 
arrows to respectively decrease or increase that percent-
age. The impact of your contrast setting upon different 
color bars is instantly shown in the lower part of the 
screen.

15.Light Timer

This option allows you to set the time interval that will be 
used to turn off the display backlight when not in use. 
Times available are: 30 seconds; 1, 2, 4 or 10 minutes; or 
Timer Off.
After selecting the 

Light Timer

 option from the Setup 

menu, use the up/down arrow to highlight the desired 
choice and then press ENTER.

16.Beeper

This option allows you to select which actions will cause 
the beeper to sound. You can select one of the following 
choices:

-

Off

 (beeper will never sound)

-

Keys Only

 (pressing a key causes a beep)

-

Alarms Only

 (when an alarm is activated)

-

Keys & Alarms

 (beeper will sound when a key is pressed 

or an alarm is activated)

After selecting the 

Beeper

 option from the Setup menu, 

use the up/down arrow to highlight the desired choice and 
press ENTER.

Default: 50%

Default: 4 minutes

Summary of Contents for MobileMapper - GPS Software































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands