![Magellan MobileMapper - GPS Software User Manual Download Page 50](http://html1.mh-extra.com/html/magellan/mobilemapper-gps-software/mobilemapper-gps-software_user-manual_3541313050.webp)
42
Position Screens
Position screens #1 and #2 display your present position us-
ing the coordinate systems that you have selected. This screen
shows all of the basic position, time and satellite information.
Additionally, on Position screen #1, current navigation infor-
mation is shown in the bottom half of the screen.
For the sake of comparison, Position screen #2 provides the
coordinates of your present position both in the selected pri-
mary coordinate system and map datum, and in the selected
secondary coordinate system and map datum.
Position screen #1 contains the following information, from
top to bottom:
-
Coordinates and elevation of your current position: Dis-
plays your current position in the chosen coordinate sys-
tem. Also displays the elevation of the current position. If
MobileMapper Pro is not computing position fixes, the last
computed position is displayed.
-
GPS Satellite Status: Provides information on the current
status of the GPS receiver portion of the MobileMapper
Pro (see table below).
Message
Description
Searching - 1st sat
Searching for 1st satellite
Searching - 2nd sat
1st satellite found; searching for 2nd satellite
Searching - 3rd sat
2 satellites are being tracked; searching for a 3rd
Searching - 4th sat
3 satellites are being tracked; searching for a 4th
Collecting Data
All satellites needed for position fix are being
tracked and position is being computed
Averaging
MobileMapper Pro is computing fixes; speed is
near 0.0 and so position is being averaged
EPE xxx.
Estimated Position Error. MobileMapper Pro is
computing fixes while moving
DGPS
Computed fixes are being differentially corrected
Position Screens 1 & 2
To switch from a screen
to the other, just press
the Left or Right arrow
key.
The same data as on
Position screen 1 is
displayed on Position
screen 2 except that
the lower part of the
screen, containing the
two data fields and the
trip odometer field, is
replaced with the cur-
rent position’s coordi-
nates expressed in the
chosen secondary coor-
dinate system and map
datum.