English
53
-
To demand that a remote device be allowed to access the
local services only after pairing itself with MobileMapper
CX
, check the
Enabled
box underneath
Authentication
. Oth-
erwise keep this option disabled (check box cleared).
Caution!
This option is automatically disabled every time
you start Bluetooth Manager.
-
Tap
OK
on top of the window for the changes to take
effect.
Local Services
Introduction
The local services offered by MobileMapper CX’s Bluetooth
controller are the following:
•
Serial Port Service
. The Serial Port service allows you to
exchange data with a remote device via a virtual Bluetooth
serial port. This service is used when outputting GPS data
via an auxiliary output (see
).
•
File Transfer Service
. This service allows any two Blue-
tooth-enabled devices to exchange files.
• Object Push Service
. This service is required to run the
File Transfer Service but is not usable as such in MobileM-
apper CX.
To list the local services offered by MobileMapper CX:
• Tap
located in the Bluetooth Manager toolbar. The
Bluetooth window shows the three icons representing its
three local services.
Note that all the services are made active at power up (a
small green circle containing a plug symbol is visible on
each active service; see screen opposite).
Summary of Contents for MobileMapper CX - Hiking GPS Receiver
Page 1: ...MobileMapper CX Getting Started Guide...
Page 8: ...English...
