Magellan MobileMapper CE - Hiking GPS Receiver, Getting Started Manual, Page: 42 / 74

English
36
NTRIP
Warning ! Using NTRIP requires that you have previously fol-
lowed the entire procedure described in Step-by-Step Proce-
dure for Establishing a GPRS Connection Via Bluetooth on
page 17
.
Then do the following to implement the NTRIP DGPS mode:
- Tap on , then
Programs>GPS Utilities>DGPS Configuration
.
- Tap on the
Select Mode
button.
- In the Select Differential Mode window, enable the
NTRIP
option.
- Tap
OK
. The first time you select NTRIP, the message
No
NtripCaster specified
appears.
- Tap
OK
to close the message window. This opens the
NTRIP Settings window.
- Tap the
NtripCaster
button on top of the screen. The Ntrip-
Caster Connection window opens in which you can store
several NTRIP configurations.
Each NTRIP configuration holds the key information
allowing MobileMapper CE to connect to a given NTRIP
caster. Having the capability to save several NTRIP config-
urations in MobileMapper CE will therefore allow you to
quickly change the NTRIP caster without having to re-
enter the relevant connection parameters each time you
do that.
- To enter your first NTRIP configuration, with
New
selected
in the
NTRIP Configuration
field, tap on the
Add
button and
then enter the following parameters:
•
Name
: NTRIP Configuration Name (freely choose a
name)
•
Host
: Host IP address
•
Port
: Port number
•
Login
: User name
•
Password
: User password
(The last four parameters should have been passed on
to you by the NTRIP provider.)