Magellan MG-6060, Programming Manual

Page: 5 / 28

Magellan 5
On-board Programmable Outputs (PGMs)
Refer to Appendix 1: PGM Event Table on page 13 for the PGM events that can be used to program Magellan’s PGM outputs.
System Options
Section Description Event Group # Sub-group # Default
[086]
PGM1 Activation Event
(____/____) (____/____) No event programmed
[087] PGM1 Deactivation Event (____/____) (____/____) No event programmed
[088]
PGM2 Activation Event
(____/____) (____/____) No event programmed
[089] PGM2 Deactivation Event (____/____) (____/____) No event programmed
[090] General Options Bold = Default setting
Option OFF ON
[1] Access code length ‡ 6 digits ‡ 4 digits
[2] Audible trouble warning (except AC power failures) ‡ Disabled ‡ Enabled
[3] Lock master code ‡ Disabled ‡ Enabled
[4] Use user code 16 as duress code ‡ Disabled ‡ Enabled
[5] Console tamper supervision ‡ Disabled ‡ Enabled
[6] Need code to bypass zones ‡ Disabled ‡ Enabled
[7] PGM1 normal state ‡ N.O. ‡ N.C.
[8] PGM2 normal state ‡ N.O. ‡ N.C.
[091] General Options Bold = Default setting
Option OFF ON
[1] Panic 1 (Emergency)
‡
Disabled
‡
Enabled
[2] Panic 2 (Auxiliary)
‡
Disabled
‡
Enabled
[3] Panic 3 (Fire)
‡
Disabled
‡
Enabled
[4] Panic 1: Silent or audible alarm
‡
Silent
‡
Audible
[5] Panic 2: Silent or audible alarm
‡
Silent
‡
Audible
[6] Panic 3: Silent or audible alarm
‡
Silent
‡
Audible
[7] PGM1 used as (MG-6060 only)
‡
Direct output
‡
X10 output 7
[8] PGM2 used as (MG-6060 only)
‡
Direct output
‡
X10 output 8
[092] Arming/Disarming Options Bold = Default setting
Option OFF ON
[1]
Auto-arm on time (
)
†
‡ Disabled ‡ Enabled
[2] Auto-arm on no movement † ‡ Disabled ‡ Enabled
[3] Auto-arm in what arming mode † ‡ Regular ‡ Stay
[4] Switch to Stay arming if no entry delay is opened ‡ Disabled ‡ Enabled
[5] Regular arming switches to Force arming † ‡ Disabled ‡ Enabled
[6] Stay arming switches to Force arming † ‡ Disabled ‡ Enabled
[7] One-touch Regular/Force arming † ‡ Disabled ‡ Enabled
[8] One-touch Stay arming ‡ Disabled ‡ Enabled
† Force arming and Auto-arming are not for use in UL installations.
[093] Arming/Disarming Options Bold = Default setting
Option OFF ON
[1] Future use
‡
Future use
‡
Future use
[2] Future use
‡
Future use
‡
Future use
[3] Bell squawk when arming/disarming with remote control *
‡
Disabled
‡
Enabled
[4] No exit delay when arming with remote control
‡
Disabled
‡
Enabled
[5] Report system disarming
‡
Always
‡
After alarm only
[6] Exit delay termination
‡
Disabled
‡
Enabled
[7] Follow zones become Entry Delay 2 zones when Delay zone is
bypassed
‡
Disabled
‡
Enabled
[8] FM tuner ON when system is armed (
)
(MG-6060 only) ‡
Disabled
‡
Enabled
* Bell Squawk on Arm must be enabled for UL installations.
J [8] J [2]
J
[8]
J
[1]