Magellan Meridian Gold Page 20 User Manual Download

Page: 20 / 105

Magellan Meridian GPS Receiver

The display backlight can be set to one of three levels (low, high or
off ).

PWR

Press and

hold for 2

seconds

Display

backlight

illuminates

(low)

PWR

Press and

hold for 2

seconds

Display

backlight

illuminates

(high)

PWR

Press and

hold for 2

seconds

Display

backlight

turns off

The backlight causes severe drain on the batteries in the

Meridian. To prevent accidently turning the backlight on and

leaving it on, the Meridian will turn the backlight off when
there have been no buttons pressed for 4 minutes. Pressing

any button will turn the backlight back on in this instance. You can
change the time delay for the backlight in Setup.

Tuning the Meridian On

After accepting the warning information, the last navigation screen you
were viewing will be displayed. If the last navigation screen view was
the Map screen, the last zoom scale setting will be used.

Turning the Meridian Off

PWR

Pressing the POWER
button again will turn off
the Meridian immediately.

Pressing ESC will cancel
the power down
sequence.

PWR

ENTER

You have 10
seconds to press
ENTER accepting
the warning or the
Meridian will shut
off.

Summary of Contents for Meridian Gold










































































































Search results

Summary of Contents for Meridian Gold

Reviews:

Related manuals for Meridian Gold

Brands by name

Popular brands

Magellan Meridian Gold, User Manual

Search results

Summary of Contents for Meridian Gold

Reviews:

Related manuals for Meridian Gold

Brands by name

Popular brands