WASP Line Array User Manual rev 2.00
17
in
fo@mag-audio
.c
om
Tel./F
ax:
+
38 044 277
-4
7-89
www
.mag-audio.com
5.2.1. Connection plate
1. SERIAL NUMBER FIELD. Sticker with the systems
serial number is located here. NEVER REMOVE
THE SERIAL FROM THE SYSTEM, AS IT IS AN
IMMEDIATE WARRANTY VOID.
2. PARALLEL INPUTS. The pair of parallel Neutrik®
Speakon connectors. Use this connectors to
connect power amplifier and to feed the signal to
the parallel systems.
5.2.2. Passive connections
Suggested accessories:
CN-0021 (part No. 00-00004268)
CN-0031 (part No. 00-00004271)
CN-0032 (part No. 00-00004272)
Use power amplifier with DSP or power amplifiers
with external speaker processor with WASP line
array.
MAKE SURE TO USE HIGH PASS FILTER FOR WASP
TO PREVENT EXCESSIVE CONE MOVEMENT,
RESULTING IN TRANSDUCER DAMAGE OR FAST
DETERIORATION.
Recommended HPF settings, suggested power
amplifier ratings, and connection pins are found in
the table below.
System
Amplifier power
Amplifier impedance
Connection pins
Recommended HPF
WASP LF
600 - 1200 W
16 Ohm
+1 -1
Specified by preset
WASP HF
100 - 200 W
16 Ohm
+2 -2
Specified by preset
WASP-S12
950 - 1900 W
8 Ohm
Rear +1 -1
Specified by preset
WASP-S12
Link
Rear +2 -2
WASP-S12
Link
Front +1 -1
WASP-S12
950 - 1900 W
8 Ohm
Front +2 -2
Specified by preset
WASP-S18
1300 - 2600 W
8 Ohm
Rear +1 -1
Specified by preset
WASP-S18
Link
Rear +2 -2
WASP-S18
Link
Front +1 -1
WASP-S18
1300 - 2600 W
8 Ohm
Front +2 -2
Specified by preset
WASP connection plate
1
2
2
5.2. Passive speakers
1+1- LO 16 Ohm
2+ 2- HI 16 Ohm
Made in Ukraine
www.mag-audio.com
WASP line array passive connections
DSP AMPLIFIER
WASP module
WASP module
WASP module
WASP module
5.2.3. Connection details
