MAFI MT 32, Operating Manual

Page: 68 / 152

CONTROL ELEMENTS
Instrument panel
66 Operating manual MT 32 / 36
Four-wheel drive (switchable) <Fahrt schaltbar>
With the “switchable four-wheel-drive”, a “rigid” connection
between the front and rear axles is achieved, by engaging the
front wheel drive. You can use the switchable four-wheel drive
to increase the traction on slippery ground.
Yo u c a n sw i t c h o n t h e fo u r - w h e e l d r i ve eve n w h i l e yo u
a r e d r i v i n g . H oweve r, t h e f r o n t a x l e o n l y e n g a g e s
s h o r t l y b e fo r e t h e M T c o m e s t o a s t a n d s t i l l .
Fig. 53: Four-wheel drive
1 “Four-wheel drive” switch
2 Control light
Switching on the four-wheel drive in continuous mode
and switching it off yourself
The four-wheel drive stays on until you switch it off yourself.
X To switch it on, press switch 1 up.
3
The switch latches into position.
3
The four-wheel drive is switched on in continuous mode;
control light
2 is lit.
X
To switch it off, press switch 1 back to the centre position.
3
The control light 2 goes out.
3
The four-wheel drive is off.
T h e c o n t i nu o u s m o d e o f t h e fo u r - w h e e l d r i ve i s fo r
ex a m p l e u s e d i n t h e eve n t o f s n ow a n d i c e.