-12-
1.4
Noise emission
The stated values do not take any series variance into account They do not serve as basis for the determination
of the noise rating level as they vary in dependence of the time in service, the type of processing and the ambi-
ent conditions. The noise rating level can therefore only be determined at the machine user for individual cases.
1.5
Vibration
The typical rated acceleration in the hand-arm area is smaller than 2.5 m/s
2
.
1.6
Delivery specification
1.7
Use according to intended purpose
Any use beyond the above-stated is considered as
not compliant with the specified use according to
intended purpose. The manufacturer is not liable for
any damage caused as a result of this; the risk is
borne solely by the user.
The machine is not suitable for operation in the rain
outdoors or in areas subject to explosion hazards.
Intended use also includes the compliance with the
operating, maintenance and repair instructions speci-
fied by the manufacturer and adherence to the safety
instructions contained in the operating instructions.
The HB 2 E drill must only be operated, fitted and
maintained by persons over the age of 18 who are
familiar with the machine and have been informed
on the risks involved. Repair work must be carried
out by authorized MAFELL dealers or a MAFELL
customer service station.
The relevant accident prevention regulations and
other generally recognized industrial, medical and
technical safety rules must be complied with.
Unauthorized modifications to the machine preclude
the liability of the manufacturer for any resultant
damage.
Working weight
2.45 kg (5 2/5 lbs)
Right-hand/left-hand motion
Torque
max. 25 Nm
Universal motor with RFI and TV interference suppression:
Voltage
230 V ~
Frequency
50 - 60 Hz
Input rating continuous operation
1050 W
Electronic full-wave control
Sound power level (determined according to EN 60745-1 and EN 60745-2-17)
88 dB (A)
Workplace-related emission value (determined according to EN 60745-1 and
EN 60745-2-17)
77 dB (A)
HB 2 E drill complete with:
1 additional handle
1 "MAX" transport case
1 operating manual
1 folder “Safety Instructions”
1 mains cable
The MAFELL HB 2 E drill is exclu-
sively designed for drilling operations
in wood (max.
∅
60mm / 2 3/8 in.),
in steel (max
∅
16mm / 5/8 in.) for
screwing operations in wood (max.
∅
10mm / 25/64 in.) and in sheet
steel (max.
∅
8mm / 5/16 in.).
Summary of Contents for HB 2 E
Page 3: ... 3 Abb 1 Fig 1 ill 1 afb 1 ...
Page 41: ......
