![background image](http://html.mh-extra.com/html/mafell/dd40p/dd40p_operating-safety-instructions-manual_689016015.webp)
DD40P
01/2022
15
4.6
Drilling depth setting
The drilling depth can be set continuously in a range between 0 - 40 mm [0 to 1.57 in].
Use the following procedure to adjust the drilling
depth:
1.
Loosen the wing screw (5) for the depth stop.
2.
Push the depth stop (6) to the desired value.
➢
The value is indicated by the pointer (14).
3.
Tighten the wing screw (5) for the depth stop.
✓
Drilling depth adjusted.
Fig. 8: Adjusting the drilling depth
4.7
Height adjustment of the swiveling guide fence
The height of the swiveling guide fence and thus the drilling distance to the drill axis can be adjusted
continuously in a range between 7 and 40 mm [0.28 and 1.57 in].
Use the following procedure to adjust the height
of the swiveling guide fence:
1.
Loosen the wing screw (4) for the height
adjustment.
2.
Push the swiveling guide fence (1) to the
desired height.
➢
The height is indicated on the scale (3).
3.
Tighten the wing screw (4).
✓
Height of the swiveling guide fence
adjusted.
Fig. 9: Adjusting the height of the swiveling guide fence
Using the rotating turret stop (9), you can select one of five fixed preselected distances:
6.5 mm
[0.26 in]
8 mm
[0.31 in]
9.5 mm
[0.37 in]
11 mm
[0.43 in]
12.5 mm
[0.49 in]