62
12-VOLT BATTERY
12-volt battery charging
Warning
: Never use an extension lead or multi-plug adaptor
to extend the reach of the battery charger. If using the
motorcycle abroad, never use a plug adaptor with the battery
charger. Always fully unwind the charger cable, to reduce the
chance of the cable overheating. Do not expose the battery
charger to rain or water, and never immerse the charger or
cables in water.
Caution
: Maeving do not recommend the use of a battery
quick charger on the motorcycle, as it could overcharge and
permanently damage the 12-volt battery.
Always charge the motorcycle batteries in a well-ventilated area.
Once charging is complete, isolate the power supply to the charger
before removing the battery.
Connect a battery optimiser to the electrical connector and allow the
12-volt battery to become fully charged. The battery optimiser must
charge at one ampere or less.
!
!
!
!
!
!
Summary of Contents for RM1
Page 1: ......
Page 76: ...Maeving RM1 Owner s Handbook 76 SERVICE AND MAINTENANCE General repair notes...
Page 83: ......
Page 84: ......