SG502: Erase entire non-volatile memory
Command: SG502
Response (SMS): @<ID>,502!
This will erase all the non-volatile parameters saved in flash memory, including diagnostics values.
/!\ Caution: This command force all the settings to factory default. The unit will then reboot once.
Example:
One shot reset and restore to factory configuration
Command: SG502
Response: @352238020015913,502!
SG503: Update Firmware
Command: SG503,<FILE>
Response to indicate update start (SMS): @<ID>,503,1,<FILE>!
Response to confirm completion (SMS): @<ID>,503,2,<VER>,<PF>!
–
Where <FILE> is the filename
–
Where <VER> is the firmware version
–
Where <PF> is profile name
Example:
Launch DOTA update
Command: SG503,update1.1.wpb.dwl
Response: @352238020015913,503,1,update1.1.wpb.dwl!
Response after reboot on new version: @352238020015913,503,2,101109BV1.1,FIRSTSET!
SG531: Read and report vehicle position immediately
Command: SG531,<RSP>
Response (TCP/UDP or SMS): @<ID>,531,<PF>,<GPS>,<BV>,<RSSI>,<STARTER>,<IGNIT>,<D>,<T>,
<LT>,<LN>,<AL>,<SP>,<DIR>,<SAT>,<HDOP>,<MI>!
–
Where <RSP> is the means by which the response will be sent
•
1 = TCP/UDP/UDPwACK as configured
•
2 = SMS
•
If omitted, it will send report via the medium use to send the command. ie if you send SG551
command by SMS it will reply by SMS.
–
Where <D> is the date (10 characters YYYY/MM/DD)
–
Where <T> is the time (8 characters HH:MM:SS)
40
Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
3603-9, 36/F., 118 Connaught Road West, Sheung Wan, Hong Kong
