
MAESTRO WIRELESS SOLUTIONS
| Network
73
E PACK | USER MANUAL VERSION 2.3
http://support.maestro-wireless.com
B.
Interface Protocols
The
Protocol configuration
on the Interface General Settings page allows
configuring the protocol with respect to the router model number. The
available protocol options are as below and please make sure that you select
an appropriate protocol as mentioned in the table below for the selected
interface.
Interface
➔
Protocols
LAN
WAN
WWAN
Cellular
CELLDHCP
(E206)
Static
Address
✓
✓
DHCP
Client
✓
✓
✓
PPPoE
✓
PPPoAT
M
✓
UMTS /
GPRS
✓
CELLULA
R
✓
Parameters
Description
Static address
IPv4 address
–
Enter the IPv4 Address.
This IP Address must be used to access the
Router. The default IP Address is
198.162.1.1 for LAN.
IPv4 Netmask
–
Select the IPv4 Netmask.
IPv4 Gateway
–
Enter the IPv4 Address for
Gateway.
In case of LAN, if you do not provide any
Gateway IP Address, by default it will take the
same IP Address as that of the IPv4 LAN IP
Address (192.168.1.1).
For WAN, enter the IP Address of WAN gateway.
IPv4 broadcast
–
Enter the IPv4 Address
for broadcast.
Use Custom DNS servers
–
Click
t
o add
custom DNS servers.