MADRIX PLEXUS, User Manual

Page: 43 / 299

MADRIX PLEXUS User Manual (English) 43
© 2013 inoage GmbH
1.3.2.2 DMX-IN (Input)
Overview
The PLEXUS allows you to receive data via MADRIX using 1024 DMX channels per device.
Please use a Male to Male 3-pin or 5-pin XLR Gender Changer if necessary.
Usage
This chapter describes how DMX-IN can be used to control the MADRIX software remotely.
(An XLR port would be used for the connection.)
If you want to learn more about directly controlling the MADRIX PLEXUS remotely, please see the
chapter Remote Control .
Enabling USB Drivers In MADRIX
Please make sure to enable USB drivers in MADRIX.
For more information, see Loading And Enabling Drivers In MADRIX .
Connecting MADRIX PLEXUS To Your PC
Now, please connect the MADRIX directly to a free USB 2.0 port of your computer or use the USB
power supply (or USB 2.0) and the network connection for Art-Net. If the MADRIX PLEXUS driver
has been installed properly, the status LEDs will light up accordingly, as described in the chapter
Troubleshooting .
Start the MADRIX software now if not yet done.