MADRIX LUNA 4, User Manual

Page: 63 / 115

[Part 3] MADRIX 5 Software
//63
www.madrix.com
MADRIX LUNA User Manual
5] Configure Your Device
§
Make sure that your device is still selected under Preferences > Device Manager... > DMX Devices
§
Click
§
A new window will open.
Set up the following settings for your devices:
§
Source Name - Allows you to set up a specific name for the device. This name is send via network as well.
Therefore, interfaces may be able to retrieve this name and can be configured to receive data from this source.
- If you are using the default name MADRIX U:X , the universe will automatically be displayed in the name
[represented by X: 1, 2, 3, etc.].
§
ACN Universe - Defines the DMX universe from which data is received.
- Set up the same universe that is set up in your MADRIX LUNA according to the Web
Configuration. By default, MADRIX LUNA sends input data to network universe 256. You can change
these settings in the Web Configuration if required.
- According to the Streaming ACN specifications, MADRIX 5 will automatically change the ACN IP Address
according to the ACN Universe.
§
Click Apply to confirm your changes.
§
Click OK to close the window.